|
Product Details:
|
| Production Name: | PPR Glassfiber PPR Pipe Production Machine | Pipe Size: | 20-63mm; 3 Layer |
|---|---|---|---|
| Extruder Capacity: | 350kgs/h For Inner &outer +180kgs/h Middle GF | Die Head: | 3 Layer Co-extrusion With Two Extruders |
| Production Speed: | 12m/min; 20m/min; 28m/min | Control System: | SIEMENS PLC With Remote Control System |
| Highlight: | Large Diameter Ppr Pipe Production Line,12m/Min PPR Pipe Extrusion Line,Remote Control System PPR Pipe Line |
||
SMALL AND LARGE DIAMETER PPR/PE PIPE PRODUCTION LINE
DESCRIPTION:
PP-R pipe extrusion line is used to produce PPR and FR PPR pipes for cold and hot water supply in houses. Because it has good thermal resistance and thermal insulation effect. Therefore, the PP-R Pipe has the advantages such as energy saving, environmental protection, light weight, high strength, corrosion resistance, smooth inner wall without fouling, simple construction and maintenance, long service life and so on. Moreover, PP-R pipes also have great elasticity and easy assembly characteristics.
The pipe product has huge demand.
* SJ series high efficient single screw PE pipe extruder is developed by our company adopting German latest advanced technology. Screw is optimization that composing separate type screw with mixing parts. Barrel is optimization that composing groove barrel with lengthened feeding segment. There are advantages as following by combining separate type screw with groove barrel:
* It's optimized in the whole material melting process. By this way, we can get more extrusion throughput. It is achieved that the extruding material melt in a much lower temperature.
* Cutting function is produced through separate clearance and makes raw material equally. It is controlled in the melt plasticization process. Therefore, the granules that have a smaller separate clearance can enter the melting channel.
* It has a wide manufacturing range for different materials. It is suitable for all kinds of polyolefin materials and especial for materials as HDPE, PP and PPR pipes.
For a Production of PPR Pipe, the specific pipe extrusion line and other necessary accessories. The Equipment list below shows the machines and devices, which are needed for PP-R Pipe Production.
SJ series single screw extruder
SJ co-extruder for mark line or function layer
Extrusion die
Vacuum forming tank
Haul-off
Dustless cutting unit
Stacker.
Contact Person: YIN
Tel: +86 139 2198 6345/ +86 139 2197 4941
Fax: +86-512-58578311
