|
Product Details:
|
| DRYING MATERIAL: | PE FILM | Screw Diameter: | φ300mm |
|---|---|---|---|
| Screw Length: | 1300 | Inverter Power: | 90KW (DELTA) |
| Capacity: | 400~600kg/h. | Mold Die: | Auto-heating And Auto Cooling |
| High Light: | plastic reprocessing machine,plastic waste recycling machine |
||
PE Film Dryer 90KW Auto Heating / Cooling Squeezing Plastic Recycling Machine
Features:
1, Gearbox : ZLYJ315 (Guomao hardened gears)
2, Screw Diameter:φ300mm
3, Screw Length: 1300
4, Inverter Power: 90KW (DELTA)
5, Mainly Motor power:90KW 5,Inverter Power: 90KW (DELTA)
6, Screw and Barrel adopt 38CrMoAlA and nitriding treatment
7, Barrel heating power: 1zone*6KW=6KW, heating by electric
8, Capacity: 400~600kg/h.
9, Pelletizer(Cutting with 4 knifves) with Inverter : 2.2KW
10. diehead: Discharging hole diameter:12mm, copper pipe cooling
11, Air blower:3.0KW with transport pipe and stainless Storage Hopper: 300L capacity
12, Conveyor with inverter
13, Three-phase power: 380V/50HZ 14.water content <3%
Technical Parameters:
| Model | JM-250 | JM-300 |
| Motor Power | 75KW | 90KW |
| Gear Box Model | Hard Teeth gear box (ZLYJ250) | Hard Teeth gear box (ZLYJ315) |
| Screw Diameter | 250mm | 300mm |
| Screw Length | 1320mm | 1500mm |
| Screw Material | 38CrMoAl,Nitriding Processing | 38CrMoAl,Nitriding Processing |
| Air cooled motor | 3kw | 3kw |
| Storage Hopper | 300L capacity | 500L capacity |
| Moistures | <3% | <3% |
| Mold die | Auto-heating and auto cooling | Auto-heating and auto cooling |
| Dimenstion | 3500*1350*1800MM | Auto-heating and auto cooling |
| Weight | 1800KGS | 2000KGS |
| Capacity | 300kg/h | 500kg/h |
Why you need it? ---- Dirty PE PP film
This squeezing dewatering machine for waste plastic recycle.Especially the agricultural film, they are dirty and often with clay, sand, grassroots,
nails, wire, etc. So before granulation we have to clean and wash them.
Why you need it? ----Wet PE PP film
After clean and wash the dirty waste film, we have to squeeze the film. This squeezing dewatering machine for waste plastic recycle washing line is
not only with high capacity but also with low energy consumption. The final moisture content can up to 3%. It will help you reduce the cost and
improve productivity.
It makes materials easier to be granulated and dry, and if you use it, you will do not need following three machines: dewatering machine, pipe drying
system and agglomerator, only need one stage extruder recycling machine instead of two or three stage recycling machines
Recycled aggregate can be used to production of agricultural film, PE can also be used to make fertilizer bags, garbage bags, agricultural renewable
water pipe, fences, trees, POTS, barrels, dustbin, geotechnical material, etc
There are different capacity can be supplied: 200kg/h, 300kg/h, 500kg/h and 1000kg/h.You should choose different devices according to your
material.According to your country condition, you may choose full automatic line or semi-automatic line.Our customer may purchase separate device
based on his own conditions
Contact Person: YIN
Tel: +86 139 2198 6345/ +86 139 2197 4941
Fax: +86-512-58578311
